Fenix Process Technologies Pvt. Ltd.Fenix Process Technologies Pvt. Ltd.

Seperator Internal for Oil & Gas Industry

Share: FacebookTwitterStumble
Pioneers in the industry, we offer Seperator Internal for Oil & Gas Industry such as Mist Eliminators, Vane Inlet Device and Oil & Gas Separator Internals from India.



Mist Eliminators
Large View

Mist Eliminators

(Item Code : FXMist)

Fenix designs and manufactures efficient and low-cost Mist Eliminators to remove liquid droplets entrained in a vapor flow. Due to very high fraction of void space, the pressure drop is negligible.

Our Mist Eliminators are made of pack of porous blankets of metallic wire or layers of pre-shaped metal sheets or strips. Mist eliminators prevent loss of valuable products and help produce high quality condensate for applications such as vacuum distillation including refinery operations, evaporators, refinery lube towers, absorbers, steam drums, scrubbers etc. These are also used for any mass-transfer counter current operation where foaming/frothing occurs to prevent liquid entrainment in the product.

Our portfolio of mist eliminators contains:-

  • Knitted Mesh Type
  • High Efficiency Mesh Type
  • Standard Vane Type
  • Pocketed Vane Type and
  • Chevron Type

Other Information 

  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: One Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 300 tpa
  • Delivery Time: 6 weeks
  • Packaging Details: Standard
  • Warranty : Process performance is guaranteed by us for 6 months post-commissioning
Other Information
  • Pay Mode Terms: L/C (Letter of Credit)
  • Port of Dispatch: Mumbai
  • Production Capacity: 2400
  • Delivery Time: 8 weeks



Vane Inlet Device

(Item Code : FXIntSep_VID)

This Oil & Gas Internal is a simple inlet device consisting of a series of vanes. Fenix VIDs separate liquid phase from the gas phase from raw Oil & Gas streams. It is normally used in horizontal separators where there is a requirement for reasonable flow distribution with low shear and low pressure drop. In horizontal vessels, this is suited to top entry. Benefits of this device compared with simple deflectors include reduced agitation and hence improved two- and three-phase operational performance, more stable level control and reduced foaming.

Other Information

  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: One Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 200 tpa
  • Delivery Time: 10 weeks
  • Packaging Details: Standard
  • Warranty : Process performance is guaranteed by us for 6 months post-commissioning

Vane Inlet Device
Large View



Oil & Gas Separator Internals
Large View

Oil & Gas Separator Internals hot

(Item Code : Internals)
Fenix offers a range of design services to support front-end engineering including process simulations, SELECTION OF Separator Internals (for Oil & Gas Industry, vessel sizing and optimization. High quality raw materials are used for the manufacturing of Separator Internals, giving reliability and durability. Available in various sizes, we can also customize them according to customer requirements.



Vane Packs

(Item Code : FXIntSep_VanePack)

Fenix has the strength to design and manufacture high-efficiency petroleum processing equipments such as Vane Packs, Mist Eliminators, Carbon Capture Columns,  TEG Dehydrators etc. along with the related mechanical designs for the Oil & Gas sector. The parameters considered for design of Vane Packs are particle size of the entrained liquid droplets and physical properties of the fluids to maintain minimal  pressure drop, required throughput and high efficiency.

We offer a complete range of efficient vane packs for both horizontal and vertical flow.

The mist laden gas stream passes through the parallel vane plates and is forced to change direction several times. The mist droplets are separated by the subsequent centrifugal forces and are collected on the vane blades. This coalesced liquid film is then drained through slits or pockets to a liquid sump prior to drainage to the liquid compartment of the vessel.

Size of mist droplets than we can separate = 9 µm or larger 
Maximum pressure drop = 10 mbar

Other Information

  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: One Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 200 tpa
  • Delivery Time: 10 weeks
  • Packaging Details: Standard
  • Warranty : Process performance is guaranteed by us for 6 months post-commissioning

 

Other Information
  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 3000 pieces
  • Delivery Time: 8 weeks
  • Packaging Details: Standard

Vane Packs
Large View



Sand Jetting Systems
Large View

Sand Jetting Systems

(Item Code : FXIntSep_SJ)

Raw petroleum crude, from almost all sources, when extracted from the well contains 3 phases – Oil, Gas and sludge, the last item containing particles of sand and other rocky material. The initial processing is required to separate these three phases and in doing so, invariably there would be deposition (within the processing equipment) of sandy solids which need to be cleaned at certain intervals.

Fenix has been designing and manufacturing efficient and cost-effective Sand jetting Systems for oil & Gas industry

Other Information

  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: One Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 300 tpa
  • Packaging Details: Standard
  • Warranty : Process performance is guaranteed by us for 6 months post-commissioning

{short description of image}




Contact Us

Fenix Process Technologies Pvt. Ltd.
Mr. Prashant Chavare / Mr. Sankar Ghosh (Business Development Manager)
K - 6/1, Malini, Near Mangeshkar Hospital, Erandwane Cooperative Housing Society
Pune - 411004, Maharashtra, India

Contact via E-mail





Member IndiaMART.com © Fenix Process Technologies Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited